2835 Single Color Strip: Specifications, Applications, and Selection Guide
A 2835 single color strip is a flexible LED circuit board fitted with surface-mount LEDs in the 2835 package and designed to emit one selected color, such as white or a single non-white color. To choose the right strip, match its light output, color characteristics, voltage, power, protection level, and cut interval to the installation. The “2835” designation refers to an LED package measuring approximately 2.8 mm × 3.5 mm; it does not by itself specify brightness, efficiency, or strip quality. At ENTA Lighting, we recommend evaluating the complete product specification and intended application rather than choosing by LED package name alone.
If you are looking for more details, kindly visit our website.
Who This Guide Is For
This guide is for lighting distributors, project buyers, contractors, and OEM teams comparing single-color flexible LED strips for indoor applications. It is useful when you need to prepare a product specification, request a quotation, or check whether a proposed strip suits a particular installation. Because product details vary by model, use the figures in this article as selection context, not as specifications for every 2835 strip. Confirm the final values against the supplier’s datasheet and quotation.
How a 2835 Single Color Strip Works
The strip consists of LEDs and electrical components mounted on a flexible printed circuit board, with adhesive backing commonly used to support surface mounting. When connected to a compatible power supply, the LEDs emit the strip’s specified single color. A single-color product is distinct from an RGB strip: it is not designed to mix red, green, and blue channels to create changing colors. Dimming and control options depend on the strip design and compatible driver or controller.
What the 2835 Package Number Tells You
The package designation describes the approximate footprint of the LED component, not the number of LEDs per meter or the finished strip’s performance. Two products using 2835 LEDs may differ in LED density, color temperature, circuit design, power consumption, heat management, and optical output. For this reason, package type is a useful identifier but not a complete purchasing specification. Ask suppliers to state measurable strip-level details for the exact model being quoted.
Types and Key Specifications
2835 single-color strips are available in different configurations, including white light at different color temperatures and single-color options such as red, green, or blue. Construction can also vary by circuit-board width, LED spacing, adhesive, and protective coating or encapsulation. A coated or sealed version may be considered where the installation needs additional protection, but the actual protection level must be confirmed for the specific product. Do not assume that every flexible strip is suitable for wet, dusty, or outdoor locations.
| Specification | What to confirm | Why it matters |
|---|---|---|
| Color and color temperature | Specified color; for white, the offered color-temperature range and consistency information | Helps match the strip to the visual intent and other light sources. |
| Voltage and power | Rated input voltage and watts per meter for the selected model | Supports correct power-supply sizing and electrical planning. |
| Light output | Lumens per meter or another clearly defined output measure | Allows a more useful comparison than LED package type alone. |
| LED density and cut interval | LEDs per meter and the marked cutting positions | Affects appearance, layout flexibility, and installation accuracy. |
| Board and protection | Strip width, adhesive details, and any stated protection rating | Checks compatibility with the mounting channel and environment. |
Common low-voltage strip systems include 12 V and 24 V models, but availability and suitability depend on the product. Commercial strips are also often supplied on 5 m reels, although reel length and order format should be confirmed rather than assumed. As a third useful reference point, the 2835 LED package is approximately 2.8 mm × 3.5 mm; this dimension is not a measure of strip width. Request the datasheet for the precise voltage, reel format, and package details under consideration.
If you want to learn more, please visit our website ENTA Lighting.
Matching the Strip to an Application
Single-color strips are commonly considered for indoor accent lighting, display and cabinet details, cove lighting, signage, and linear decorative features. The best configuration depends on the required appearance, mounting surface, operating conditions, and available space for power and heat management. For a visible installation, consider LED spacing and whether a diffuser or channel is needed to achieve the intended look. For task or primary lighting, verify delivered light levels in the finished installation rather than relying only on a strip’s nominal description.
Indoor Project Considerations
In a cabinet or display, dimensions, cut positions, and the visibility of individual LEDs may be important. In a cove or indirect-lighting detail, the distance to the reflecting surface and the chosen diffuser can affect how uniform the result appears. For long runs, voltage drop and the manufacturer’s recommended connection method should be reviewed with the installer. If the strip will be exposed to moisture, dust, or frequent cleaning, specify those conditions before selecting a protection construction.
A Practical Selection Framework
- Define the lighting goal. Specify whether the strip is decorative, for display, or intended to contribute to task lighting. Identify the color or white-light appearance required.
- Measure the installation. Record total run length, available mounting width, cutting needs, and the location of the power supply. Include bends, connectors, and access constraints in the layout.
- Set electrical requirements. Compare rated voltage, watts per meter, and run length, then confirm power-supply sizing and wiring guidance with the supplier or qualified installer.
- Check output and visual quality. Request the light-output specification and relevant color information for the exact model. Where appearance is critical, evaluate a sample in the intended channel and surroundings.
- Confirm environmental and installation details. Match the protection construction, adhesive, and mounting method to the actual site conditions. Check whether a profile, diffuser, or additional thermal consideration is required.
- Approve the complete specification. Align the datasheet, sample, quotation, and purchase order so that they describe the same model and configuration.
Pricing, MOQ, and Lead Time
The price of a 2835 single-color strip can vary with the selected LED and circuit configuration, output requirements, board width, protection construction, and order quantity. Packaging, accessories, and any requested customization can also affect the quotation. Minimum order quantity and lead time are supplier- and project-dependent, so we recommend requesting them alongside the product specification rather than treating them as fixed market-wide values. For an accurate offer, provide the target color, voltage, length, intended environment, estimated quantity, and delivery destination.
Supplier Evaluation Checklist
- Does the supplier provide a model-specific datasheet with voltage, power, output, dimensions, and cutting details?
- Can the supplier clarify the offered color, color-temperature information where applicable, and protection construction?
- Can the quoted sample, specification, and production item be identified by the same model or revision details?
- Are MOQ, quotation validity, packaging, lead time, and shipping terms stated clearly?
- Can the supplier explain installation limitations and provide guidance on compatible power and control components?
At ENTA Lighting, we support B2B buyers in reviewing 2835 single-color strip requirements and comparing available configurations for indoor projects. Sharing a drawing, target specification, or sample requirement helps our team assess the fit more accurately. We can also discuss the quotation details that matter to your purchasing plan, including quantity and delivery expectations. Final product selection should be based on the agreed specification and the conditions of the installation.
Key Takeaways and Next Steps
A 2835 single color strip is defined by its single-color output and 2835 LED package, but the package number alone does not determine brightness or suitability. Compare the actual color, voltage, power per meter, output, LED density, cut interval, protection, and installation requirements for each model. Treat 12 V and 24 V options and 5 m reels as common market formats to verify, not universal product specifications. To move forward, prepare your project requirements, request a model-specific datasheet and quotation, and review a sample when visual appearance is important.
For help evaluating a 2835 single-color strip for your indoor lighting project, contact ENTA Lighting with your target application, required color, estimated length, and order quantity. We can review the information with you and discuss an appropriate product configuration and sourcing plan.